Description
Some ZF-transmissions may require that you grind the adapter plate as there is an edge on the transmission that collides with the adapter.
Make sure that you use the correct clutch cylinder so the release bearing doesn’t get overfilled. This could lead to oil leaking on the rubber rings which would wear out the bearing. You could use 0,65″ but 0,75″ is recommended with pedal-stop. Or OEM-cylinder with pedalstop.
Also make sure that there is at least a 3 mm gap between the pressure plate and the bearing. When the discs wears out the gap is neccesery so that the clutch doesnt burn up.
Film about our bearings:
https://www.instagram.com/p/B-wyzNjFN4h/
Fredric Aasbø on Tenaci Release Bearings:
https://www.youtube.com/watch?v=fwCHIPZksG8
Tenaci-Series Hydraulic Release Bearings (Saab 9000-type Mount)
The Tenci-Series hydraulic release bearings (HRBs) are designed to fit gearbox with a 3-bolt “Saab 9000” release bearing mounting pattern. With 3 bearing options, the Tenaci-Series HRBs are an excellent choice.