Tenaci hardy disc 96-105 mm

Make sure that that the drive train align so that the prop shaft will be straight.
Elathane 95A bushings.

12,44 mm hole.

Installation guide:

1 Preferred bolts are 12:9

2 Torque according to specifications http://www.millway.se/atdragningsmoment/

3 Make sure the prop shaft aligns with the engine (Important)

4 Change to rigid or stiff bushings for engine and gearbox

5 Use washers on both sides of the bushings they wont fall out.

Ignoring any of these steps can result in imbalances or failure of the hardy disc.