Tenaci solid flywheel M60 -240 mm (use with automatic flexplate flywheel)

4 495,00kr incl. TAX
3 596,00kr excl. TAX

For BMW 540 V8 engine M60

Flywheel BMW M60 V8 540 Fits Sachs 765 Twin tenaci 240mm.

 

 

This flywheel has 3-level stepdown which can extend the life-span of the clutch discs.

Use the flywheel  directly on the original automatic flexplate flywheel.

A huge benefit of this flywheel is that it features a 3-level stepdown which allows you to further tighten the clutch when your discs are worn. Which means you can extend the life of your clutch discs without having to buy new ones.

3 i lager

Artikelnr: tm00200210 Kategorier: ,

Beskrivning

 

Description

Flywheel BMW M60 V8 540 Fits Sachs 765 Twin tenaci 240mm.

31mm High

Note! Placed on top of the automatic transmission starter ring/Flexplate

Installation film

If necessary, see picture 4 so that the guide pins are attached in the right place, Applies to ALL Sachs 765

Glue with locktite.

flywheel bmw 540

Tenaci

Fits Sachs 3082 999 765

3082 999 618

A Sachs 765 is spec’d for 600nm with an organic plate and about 30% more with a quality sinter.

So it can handle about 800nm.

So you can’t put it in 5th gear and think that you can brake it. Even if you ”only” have 700nm. Then you defy the laws of physics.

If you drive for example with an m60 m62 engine and have 700-900nm, you can’t kick the clutch in 4-5 with 245-305 tires and think that it will handle it without slipping. At 2500-3000rpm, it’s death for the clutch. Regardless of what plate you have chosen.

Then you simply have to buy a twin 765 or a 2-plate clutch that can handle 1250nm.

These flywheels have a stepdown of 1.5 mm and our previous models had a stepdown of 0.5mm. If you are going to ”max out” the Sachs 765, you can advantageously measure the pressure plate and then skim it in exactly by putting thin skims on the flywheel. Because then you are touching the ”outer” limits of what a 765 can handle, a 765 is around 1200-1300kg

Fredrik Pysnader drove his sinter for 1.5 years before it gave up and he had to buy a new one. It was probably a little misadjusted.

He has 643Hp and 920Nm, what makes it not slip for him probably has to do with the fact that he only has 225 tires.

http://www.speedhunters.com/2016/10/smoking-out-the-internet-v8-volvo/

When Fredrik tried in 5th it didn’t work, but in 4th it worked.

The Tenaci discs have Miba pads. That is, it is EXACTLY the same brand as on Ap Alcon Helix and Sachs.

The most important thing when installing this kit is to check that you have about 2-3 mm of play / distance between the fan and the bearing. Because when the plate starts to wear out, the spring goes out and then it goes very quickly before the clutch slips. We do not want under any circumstances that you drive with a no name plate, it is doomed! Plates that we recommend are Tenaci Kep Sachs Ap Alcon Helix.

 

Ytterligare information

Vikt 4 kg
Vikt

4kg

Bilmärke

BMW

Bilmodeller

BMW – 5 SERIE